Application: Attaches 20 gauge metal track to 20 gauge metal studs.
Specifications
Meets ASTM A 510 for carbon steel manufacturing
Meets ASTM C 1002 for attaching gypsum board to steel studs
Features
Type "S" point for fastening gypsum to light gauge steel
Reverse locking serrations for stripping control and vibration protection
Installation
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | ||||||||
| Fastener | Steel Gauge | |||||||
| Size | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 6 x 7/16 | 247 | 316 | ||||||
| Shear Values (Avg. Lbs.) | ||||||||
| Fastener | Steel Gauge (Lapped) | |||||||
| Size | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 6 x 7/16 | 624 | 747 | ||||||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: 6F
No documents available