Application: Attaches exterior sheathing to metal.
Drill Capacity (in.): .035 - .090
Specifications
Meets ASTM C 1513 for cold-formed steel framing connections
Meets ASTM A 510 for carbon steel manufacturing
Meets ASTM C 954 for attaching track to steel studs
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Ruspert Coating meets ASTM B 117 for salt spray corrosion
Meets ASTM F1941 for corrosion resistance
Features
Exceeds 1,000/hrs. salt spray resistance
Installation
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. The bugle head fastener is properly seated when the head sits flush or slightly countersunk with the sheathing surface. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 6-20 | 2 | 126 | 218 | 366 | 496 | 825 | 1004 | ||
| Shear Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 6-20 | 2 | 444 | 721 | 875 | 912 | ||||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: D614R_D617R
Coating Information: Ruspert
No documents available