Application: Attaches metal to metal.
Drill Capacity (in.): .060 - .220
Specifications
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Installation
A 3/8" hex nut setter or 3/8" drive socket with torque limiting nose piece set at a maximum of 1750 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | ||||||||||
| Fastener | Steel Gauge | |||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 14-14 | 3 | 287 | 339 | 595 | 856 | 1114 | 1805 | 2337 | 4416 | 4485 |
| Shear Values (Avg. Lbs.) | ||||||||||
| Fastener | Steel Gauge (Lapped) | |||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 14-14 | 3 | 905 | 1401 | 2040 | 2509 | 2573 | 2738 | |||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: 4HA1412_4HA1432
No documents available