Product Description
Strong-Point 410 Stainless Steel Unslotted Indented Hex Washer Head, Passivated and Waxed, 12-14 x 1-1/2, #3 Point, Box of 2,500
Application: Attaches metal to metal.
Drill Capacity (in.): .035 - .210
Specifications
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Installation
A 5/16" hex nut setter or 5/16" drive socket with torque limiting nose piece set at a maximum of 2000 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 12-14 | 3 | 283 | 333 | 537 | 737 | 1034 | 1585 | 2349 | 2911 |
| Shear Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 12-14 | 3 | 749 | 1320 | 1574 | 1914 | 1929 | |||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: 4H1212_4H1240
Specifications
Documentation
No documents available