Application: Attaches metal to metal.
Drill Capacity (in.): .125 - .500
Specifications
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Installation
A 5/16" hex nut setter or 5/16" drive socket with torque limiting nose piece set at a maximum of 1500 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | ||||||||||
| Fastener | Steel Gauge | |||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 12-24 | 5 | 475 | 672 | 951 | 1486 | 2269 | 3593 | 3882 | ||
| Shear Values (Avg. Lbs.) | ||||||||||
| Fastener | Steel Gauge (Lapped) | |||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 | 1/4 |
| 12-24 | 5 | 2622 | 2641 | 2682 | ||||||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: 4H5_4H53
No documents available