Product Description
Strong-Point 410 Stainless Steel Unslotted Indented Hex Washer Head, Passivated & Waxed with 1/2"" O.D. Bonded Washer, 10-16 x 1, #3 Point, Box of 3,000
Application: Attaches metal to metal.
Drill Capacity (in.): .035 - .176
Specifications
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Installation
A 5/16" hex nut setter or 5/16" drive socket with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 10-16 | 3 | 261 | 293 | 487 | 690 | 941 | 1432 | 2017 | |
| Shear Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 10-16 | 3 | 709 | 1231 | 1497 | 1508 | ||||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: 4HA1012_4HA1032
Specifications
Documentation
No documents available