Application: Attaches wood to metal.
Drill Capacity (in.): .035 - .176
Wood Attachment Range: 1/4" - 7/8"
Specifications
Meets ASTM C 1513 for cold-formed steel framing connections
Meets ASTM A 510 for carbon steel manufacturing
Manufactured to SAE J78 for dimensional specifications
Meets F.I.P.-1000.7 for torsional strength and drill speed
Meets ASTM F1941 for corrosion resistance
Features
Used for attaching lumber to headers to steel
Wings ream hole in wood preventing "jacking action"
Installation
A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure.
| Pullout Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 10-16 | 3 | 261 | 293 | 487 | 690 | 941 | 1432 | 2017 | |
| Shear Values (Avg. Lbs.) | |||||||||
| Fastener | Steel Gauge (Lapped) | ||||||||
| Size | Pt | 22 | 20 | 18 | 16 | 14 | 12 | 1/8 | 3/16 |
| 10-16 | 3 | 709 | 1231 | 1497 | 1508 | ||||
The values listed are averages achieved under laboratory conditions and imply no warranty. Appropriate safety factors should be applied to these values for design purposes.
Product Submittal: R158
No documents available